Personal Protective Coverall (Garments) - along with shoe cover -option 1

• Impermeable to blood and body fluids
• Single use
• Avoid culturally unacceptable colors e.g. black
• Light colors are preferable to better detect possible contamination
• Thumb/finger loops to anchor sleeves in place
• Quality compliant with following standard :-
       a. Meets or exceeds ISO 16603 class 3 exposure pressure, or equivalent
        b. EN 14126 (barrier to infective agents) certified.

Personal Protective Coverall (Garments) with Tape over seam along with shoe cover - option 2

• Single use
• Avoid culturally unacceptable colours e.g. black
• Light colours are preferable to better detect possible contamination
• Coverall shall be designed to be universal Fit
• Coverall shall have in built Hood Cap
• Zipper of the coverall shall be covered with a flap to avoid accumulation of microbes
• Soft Elastic to be fitted around Front of hood, wrists & ankles
• Boot Cover:
       o Pair of Boot Covers made of same fabric as of Coverall
       o Soft elastic to be fitted at two levels, ankle and end

Goggles

• With transparent glasses, Zero power, well fitting, covered from all sides with elastic band/or adjustable holder.
• Good seal with the skin of the face.
• Flexible frame to easily fit all face contours without too much pressure.
• Covers the eyes and surrounding areas and accommodates for prescription glasses.
• Fog and scratch resistant
• Adjustable band to secure firmly so as not to become loose during clinical activity
• Indirect venting to reduce fogging.
• May be re-usable (provided appropriate arrangements for decontamination are in place) or disposable.
• Quality compliant with the below standards, or equivalent:
     a. EU standard directive 86/686/EEC, EN 166/2002
      b. ANSI/SEA Z87.1-2010

N-95 Masks

• Shape that will not collapse easily
• High filtration efficiency
• Good breathability, with expiratory valve
• Quality compliant with standards for surgical N95 respirator:
        a. NIOSH N95, EN 149 FFP2, or equivalent
• Fluid resistance: minimum 80 mmhg pressure based on ASTM F1862,ISO 22609, or equivalent.
• Quality Compliant with standards for particulate respirator that can beworn with full-face shield

Nitrile Gloves (Size 6.5, 7 & 7.5)

• Nitrile
• Non-sterile
• Powder free
• Outer gloves preferably reach mid-forearm (minimum 280mm total length)
• Different sizes (6.5, 7 & 7.5)
• Quality compliant with the below standards, or equivalent:
        a. EU standard directive 93/42/EEC Class I, EN 455
        b. EU standard directive 89/686/EEC category III, EN 374
        c. ANSI/SEA 105-2011
        d. ASTM D6319-10

Face Shield

• Made of clear plastic and provides good visibility to both the wearer and the patient
• Adjustable band to attach firmly around the head and fit snuggly against the forehead
• Fog resistant (preferable)
• Completely covers the sides and length of the face
• May be re-usable (made of material which can be cleaned and disinfected) or disposable
• Quality compliant with the below standards, or equivalent:
        a. EU standard directive 86/686/EEC, EN 166/2002
        b. ANSI/SEA Z87.1-2010

. Triple Layer Surgical mask with elastic band

Three layered surgical mask of non-woven material with nose piece, having filter efficiency of 99% for 3 micron particle size.

Viral Transport Medicum with Swab (Nasal or Throat swab)

9 & 10 - Hand Sanitizer (500ml &100ml)

Option 1:

Option 2:

Option 3:

Option 4:

Sterile Gloves:

Sterile Gloves:

. Digital Infrared Thermometer (any make)

• Measures the body temperature by determining the infrared reflected from the front radiation (no contact)
• Measuring range of the infrared temperature (body) from 32 to 42.
• Resolution 0
• High accuracy+/-0
• Obtaining quick results: Time response 1 sec.
• Indication of measured value in or F.
• Limit value for the adjustable alarm as programmalbe
• Distance of measuring: at least
• Memory to store (expandable memory desirable)
• Easy to use, robust
• Automatic switchoff.
• Display backlight glow
• Waterproof lens easy to clean and disinfect
• Batteries: Which are replaceable/chargeable
• High degree of health and safety • Warranty: At least 3 years
• Accessories:
       I. Carrying case
       II. Data transfer software
      III. User manual

Digital Thermal Scanner - Full Body (with sensing to 3m and beyond)

• Compact and light weight design
• Tripod mountable
• Able to measure temperature from a distance of at least 3-5 mtrs
• Process single and multiple hotspots tracing and alarm
• Able to capture both thermal and digital camera image
• Will be able to measure temperature from 320C to 42.50C with a sensitivity of at least 0.080C
• Images should have high resolution and high sensitivity
• Can be connected to a external monitor through video output
• Built in colour screen for thermal images 5-8 inch
• Software compatible with windows. Provide the outputs of thermal data and temperature data
• Operating temperature -10 +500C
• Memory for data storage (expandable)
• Battery operated and works on external power supply
• Provide all configurations as per standard required
• Onsite installation and hands on training
• Warranty for 3 years and assured comprehensive onsite service for atleast 5 years
• Annual maintenance support for minimum 5 years.